CoilJet® Coil Cleaner

$655.00

CoilJet® CJ-125 HVAC Coil Cleaner System

No Water. No Power. No Problem. CoilJet is a portable HVAC coil cleaning system ideal for cleaning evaporator coils and condenser coil in locations where water and power may be inaccessible, such as rooftops and attics. CJ-125 is designed for portability by including separate water and chemical tanks and a long life rechargeable battery. Expertly clean condenser and evaporator coils no matter where the location may be.

Clean HVAC condenser and evaporator coils where they are.
Applies coil cleaner and then flush with fresh water.
Carries all the water and coil cleaner you need to clean up to five, 5 Ton units using 125 psi pressure.

Add to cart Details

CoilJet 8944 portable car adapter/inverter

CoilJet Car Lighter Inverter Adapter

$39.50

CoilJet Car Lighter Inverter Adapter

On-the-go charging for CoilJet Charge on the go. With the CoilJet Car Lighter Inverter/Adapter you can recharge your CoilJet between jobs while on the go. Simply plug into any standard car cigarette lighter and keep your CoilJet powered up for immediate use.

Small and portable.
Ideal for charging CoilJet on the road.
Can also be used for other small electronics charging.

WHERE TO BUY

Add to cart Details

Mini-Split Bib® Kit

$89.95

Mini-Split Bib® Kit

The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it's clean and safe all around.

Quick to set up and easy to move from job-to-job.
Reusable - lower cost per use
Includes 8' drain line for high mounts.
Keeps walls and floors safe from water and over spray.

Add to cart Details

Condenser Needle®

$159.99

Condenser Needle® Condenser Coil Cleaner

Precision Coil Cleaning Blast dirt and debris from condenser coils without damaging delicate fins with Condenser Needle. This product is designed to attach to a water hose and clean the backside of the condenser. It reaches inside most units without having to remove the fan blades and quickly cleans the entire coil bed.

Clean HVAC Condenser Coils in Minutes
Attaches to a standard water hose
36″ wand easily handles most units
Exclusive spray tip delivers 90° spray pattern up to 3+ gallons per minute
Adjustable chemical injection hose

Add to cart Details

FlowJet™ Coil Cleaner System

$895.00

FlowJet™ Coil Cleaner System

High Flow Coil Cleaning With Chemical Injection Make quick work of cleaning debris and grime from microchannel, thick condenser and evaporator coils. Powerful 400 PSI at 2.2 GPM washes even the dirtiest coils with a continuous spray of water and cleaning chemical— without damaging sensitive fins.

Optional 90° spray wand forces dirt and debris back in the direction it entered
12′ hose with additional lengths available
Water hose connection for continuous cleaning
Cleans thick HVAC coils fast

Add to cart Details

Descaler for heat exchangers and tankless water heater descaling

BucketDescaler® Descaler System

$355.00

BucketDescaler® Industrial Descaler System

Quick and easy tankless water heater maintenance Flush limescale and other deposits from tankless/on-demand water heaters and heat exchangers in just minutes. The BucketDescaler is packed with powerful performance that flushes descaler around your unit quickly for optimal performance. It features a durable, acid-proof pump and fittings, extra-long hoses, and an optional re-circulation valve kit. Perfect for tankless and tanked water heaters, boilers, and other small heat exchangers. Can also be used with glycol for flushing and filling heating lines.

6' inlet and outlet hoses
Purge valve to reduce cleanup time
Water hose connection for continuous cleaning
Remove limescale, rust, and more from tankless water heaters, heat exchangers, and more in just minutes!

Add to cart Details

SpeedyFoam® Coil Cleaner

$28.50

SpeedyFoam Condenser Coil Cleaner

The smarter, safer & biodegradable alkaline foaming micro bubble coil cleaner SpeedyFoam is safe for coated and uncoated coils. It is an acid-free, alkaline, non-caustic, degreasing foaming formula. (Say that ten times fast, I dare you). It's safer for employees to use, more effective on grease and works great on all metals and has a clean, fresh scent. Plus it's 4x concentrated, so you get more bang for your buck. It's designed for use with CoilJet and Condenser Needle but can be used with pump sprayers too.

Foaming micro bubble coil cleaner, non-acid, non-fuming and water soluble
Removes grime, oil, grease and rust from condenser and evaporator coils, mechanical equipment and air filters.
Non caustic and safe for all metals, including aluminum
Safer for coated and uncoated coils

WHERE TO BUY

Add to cart Details

SpeedyBright® Descaler

$34.95

SpeedyBright Biodegradable Descaler/Limescale Remover

Safe and effective descaler and lime scale remover approved for potable water use Scientifically formulated to dissolve all types of limescale, rust and calcium carbonate deposits from water passages and heating elements. SpeedyBright improves operating efficiency in tankless water heaters, gas/electric water heaters and other water heating/heat exchange systems. Extend the usable life of cleaned equipment by quickly and safely removing energy robbing contaminants. Phosphoric acid based cleaner classified by UL to NFS/ANSI Standard 60.

Removes lime scale effectively
Approved for potable water use
Works great with BucketDescaler®

WHERE TO BUY

Add to cart Details

BucketVac®

$114.99

BucketVac®, Wet/Dry Contractor Vacuum for 5 Gallon Buckets

THIS PRODUCT HAS BEEN DISCONTINUED. Get professional contractor performance for wet and dry vacuuming in a small and versatile package with the patent-pending BucketVac® from SpeedClean. Designed for the HVAC, plumbing or general contracting job site, the portable and convenient BucketVac wet/dry shop vacuum turns virtually any standard 5 gallon bucket* into a lightweight professional grade wet/dry vacuum. Simply snap the vacuum onto the 5 gallon bucket and get the job done, fast.

Professional grade wet/dry vacuum
Powerful suction makes short work of virtually any mess—wet or dry.
1 HP motor with 100 CFM, 60" Lift
Wide, flexible hose to reduce clogging
Compact and lightweight

Add to cart Details

Condensate Drain Tool

$39.95

Condensate Drain Line Tool for Wet/Dry Vacuums

Clear drain pans floods fast. More power. Less Mess. Attaches to virtually any wet/dry vacuum hose. Designed to clear backed up and clogged condensate drain lines, pans and more fast, the CLT-1 condensate line drain tool from SpeedClean is specifically designed to work with virtually any wet/dry vacuum. It clears drains quickly of water, dirt and other standing debris. It simply inserts into the end of the vacuum hose and goes into – or over – 3/4" and 1" drain lines and hoses for condensate lines, pumps and more. Its flexible design means it can be used in tight spots too. Plus it’s safer - and cheaper - than compressed air or CO2 and uses your regular wet/dry vacuum. And when the job's done, it's small enough to fit in most tool boxes or anywhere you keep your tools.

Fits most wet/dry vacuums with hoses up to 2 1/4" diameter
For condensate lines, drains, pans and more
Tapered end fits inside standard 3/4" and 1" lines
Ridges for maximum flexibility
Stepped to fit almost any wet/dry vacuum
Reversible end piece for fitting over 3/4" and 1" lines

Add to cart Details

CoilJet Foaming Nozzle

$35.00

CoilJet Foaming Nozzle

Creates a thick, rich lather to lift dirt and debris from coils. The CoilJet foaming nozzle is designed to add air to the spray of foaming coil cleaner, increasing foam levels and helping lift and remove dirt from HVAC and refrigeration coils.

Creates a thick, rich lather for better cleaning.
Best if use with SpeedyFoam coil cleaner.
Increases cleaning effectiveness by lifting out dirt embedded in coils.

WHERE TO BUY

Add to cart Details

CoilJet Flexible Wand

$75.00

CoilJet Flexible Wand

Reach virtually any coil in even the tightest spots. The CoilJet flexible wand can be bent to your ultimate will! Shape it to any bend or curve to reach coils in even the tightest spots.

Perfect for hard-to-reach coils.
Made from high grade copper materials.
Makes cleaning coils in tight spaces easier.

WHERE TO BUY

Add to cart Details