SpeedyBright® Descaler

SpeedyBright Biodegradable Descaler/Limescale Remover

Safe and effective descaler and lime scale remover approved for potable water use Scientifically formulated to dissolve all types of limescale, rust and calcium carbonate deposits from water passages and heating elements. SpeedyBright improves operating efficiency in tankless water heaters, gas/electric water heaters and other water heating/heat exchange systems. Extend the usable life of cleaned equipment by quickly and safely removing energy robbing contaminants. Phosphoric acid based cleaner classified by UL to NFS/ANSI Standard 60.

Removes lime scale effectively
Approved for potable water use
Works great with BucketDescaler®

WHERE TO BUY

Details

BucketVac®

BucketVac®, Wet/Dry Contractor Vacuum for 5 Gallon Buckets

THIS PRODUCT HAS BEEN DISCONTINUED. Get professional contractor performance for wet and dry vacuuming in a small and versatile package with the patent-pending BucketVac® from SpeedClean. Designed for the HVAC, plumbing or general contracting job site, the portable and convenient BucketVac wet/dry shop vacuum turns virtually any standard 5 gallon bucket* into a lightweight professional grade wet/dry vacuum. Simply snap the vacuum onto the 5 gallon bucket and get the job done, fast.

Professional grade wet/dry vacuum
Powerful suction makes short work of virtually any mess—wet or dry.
1 HP motor with 100 CFM, 60" Lift
Wide, flexible hose to reduce clogging
Compact and lightweight

Details

Condensate Drain Tool

Condensate Drain Line Tool for Wet/Dry Vacuums

Clear drain pans floods fast. More power. Less Mess. Attaches to virtually any wet/dry vacuum hose. Designed to clear backed up and clogged condensate drain lines, pans and more fast, the CLT-1 condensate line drain tool from SpeedClean is specifically designed to work with virtually any wet/dry vacuum. It clears drains quickly of water, dirt and other standing debris. It simply inserts into the end of the vacuum hose and goes into – or over – 3/4" and 1" drain lines and hoses for condensate lines, pumps and more. Its flexible design means it can be used in tight spots too. Plus it’s safer - and cheaper - than compressed air or CO2 and uses your regular wet/dry vacuum. And when the job's done, it's small enough to fit in most tool boxes or anywhere you keep your tools.

Fits most wet/dry vacuums with hoses up to 2 1/4" diameter
For condensate lines, drains, pans and more
Tapered end fits inside standard 3/4" and 1" lines
Ridges for maximum flexibility
Stepped to fit almost any wet/dry vacuum
Reversible end piece for fitting over 3/4" and 1" lines

Details

CoilJet Foaming Nozzle

Creates a thick, rich lather to lift dirt and debris from coils. The CoilJet foaming nozzle is designed to add air to the spray of foaming coil cleaner, increasing foam levels and helping lift and remove dirt from HVAC and refrigeration coils.

Creates a thick, rich lather for better cleaning.
Best if use with SpeedyFoam coil cleaner.
Increases cleaning effectiveness by lifting out dirt embedded in coils.

WHERE TO BUY

Details

CoilJet Flexible Wand

Reach virtually any coil in even the tightest spots. The CoilJet flexible wand can be bent to your ultimate will! Shape it to any bend or curve to reach coils in even the tightest spots.

Perfect for hard-to-reach coils.
Made from high grade copper materials.
Makes cleaning coils in tight spaces easier.

WHERE TO BUY

Details

Mini-Split Bib Kit Replacement Bib

High-quality replacement bib. The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.

For use with Mini-Split Bib Kit.
Made from high grade 4 mil plastic.
Long life usage.

WHERE TO BUY

Details

CoilJet Flexible Wand Straight Nozzle

CoilJet Flexible Wand 0°

Designed for ductless units, PTAC's and more. The CoilJet 0° flexible wand is the answer to cleaning small coils like you find in mini split air handlers, PTAC units and refrigeration units. It attaches quickly to your CoilJet coil cleaner and can be bent to your will to get right up on coils and clean them. Wand is available in 12" (8945-0-DEG-FW12) and 24" (8945-0-DEG-FLEX).

Perfect for hard-to-reach coils.
Made from high grade copper materials.
Makes cleaning coils in tight spaces easier.

WHERE TO BUY

Details

Mini-Split Bib Kit Replacement Tape

Keeps electronics and walls safe The Mini-Split Bib kit replacement tape is a 2" low tack adhesive tape on a roll. It is provided so you can cover sensitive electronics and walls to protect from over spray or mounting scuff marks

For use with Mini Split Bib Kit
Made from high grade plastic
Low tack adhesive grips strong but leaves no lasting mess

WHERE TO BUY

Details

SC-DS-5-VLV-KIT BucketDescaler Expansion Kit

BucketDescaler Expansion Valve Kit

Make bigger jobs seem small. The BucketDescaler expansion valve kit supersizes your bucketdescaler by allowing you to draw more volume into the system. Use it to draw more descaler or makeup water to descale larger heat exchangers, hot water tanks, boilers and more.

Installs quickly and easily.
Increases the volume of descaler and water for bigger jobs.
Made from acid proof fittings.

WHERE TO BUY

Details

BucketDescaler pH Testing Roll

You can't beat what you can't measure. The BucketDescaler pH testing roll is a quick, handy way to identify the pH of new or spent liquids. It is an integral part of the descaling process as it can quickly identify if the descaling liquid is still active for further descaling, or can identify when it has reached appropriate pH for disposal.

Color coded for easy identification.
Small portable package
Carrying case protects from elements.

WHERE TO BUY

Details

FlowJet Spray Wand

Reach spots that seem impossible. This high quality wand quickly attaches to the FlowJet and allows you to clean coils deep into the condenser or evaporator. Now reaching thick dirty coils in tight spots is easier than ever before. To extend the wand further, use with our extension lance, available in 16" (CJ-WWSS-EXT).

Attaches quickly to FlowJet spray gun.
Adds cleaning length to make jobs easier.
Made from high grade stainless steel.

WHERE TO BUY

Details

Tube Cleaner Shaft for 9/16″ – 1″ Tubes

Tube Cleaner Shaft For Tube I.D. 9/16" - 1"

High performance, incredible durability. High-performance nylon coated shaft for tube I.D. 9/16" - 1". Designed for use on SpeedClean chiller tube cleaners but also fit major competitive brand products. Shaft comes in three length sizes, of 15' (SC-TC-S03-15), 25' (SC-TC-S03-25) and 35' (SC-TC-S03-35). FOR USE WITH SC-TC-50 MODEL ONLY

High-performance nylon coating.
Industrial quality internal parts.
Standard threaded machine and brush couplings.

WHERE TO BUY

Details