• FlowJet Spray Gun

    Easily attaches to FlowJet FlowJet Spray Gun by SpeedClean is specifically for use with FlowJet Coil Cleaner systems. This high-quality spare tool attaches to equipment quickly and easily.
  • BucketDescaler 6' Extension Hose

    Durable 6' extension hose connects quickly and easily. Simply attach to BucketDescaler® and extend range for better portability to remove lime scale buildup in minutes.
  • Condensate Drain Line Tool for Wet/Dry Vacuums

    Clear drain pans floods fast. More power. Less Mess. Attaches to virtually any wet/dry vacuum hose. Designed to clear backed up and clogged condensate drain lines, pans and more fast, the CLT-1 condensate line drain tool from SpeedClean is specifically designed to work with virtually any wet/dry vacuum. It clears drains quickly of water, dirt and other standing debris. It simply inserts into the end of the vacuum hose and goes into – or over – 3/4" and 1" drain lines and hoses for condensate lines, pumps and more. Its flexible design means it can be used in tight spots too. Plus it’s safer - and cheaper - than compressed air or CO2 and uses your regular wet/dry vacuum. And when the job's done, it's small enough to fit in most tool boxes or anywhere you keep your tools.
    • Fits most wet/dry vacuums with hoses up to 2 1/4" diameter
    • For condensate lines, drains, pans and more
    • Tapered end fits inside standard 3/4" and 1" lines
    • Ridges for maximum flexibility
    • Stepped to fit almost any wet/dry vacuum
    • Reversible end piece for fitting over 3/4" and 1" lines
  • CoilJet Car Lighter Inverter Adapter

    On-the-go charging for CoilJet Charge on the go. With the CoilJet Car Lighter Inverter/Adapter you can recharge your CoilJet between jobs while on the go. Simply plug into any standard car cigarette lighter and keep your CoilJet powered up for immediate use.
    • Small and portable.
    • Ideal for charging CoilJet on the road.
    • Can also be used for other small electronics charging.
  • Tube Cleaner Nylon Brush 13/16"-1" 10/Pack

    High-performance nylon brush Tube Cleaner Nylon Brush 13/16"-1" are high-performance brushes designed for use with Tube Cleaner. Comes in bag of 10 and in sizes 13/16"(SC-TC-BN-13/16), 7/8"(SC-TC-BN-7/8), 15/16"(SC-TC-BN-15/16) and 1"(SC-TC-BN-1).
  • Tube Cleaner Nylon Brush 7/16"-3/4" 10/Pack

    High-performance nylon brush Tube Cleaner Nylon Brushes 7/16"-3/4" are high-performance brushes designed for use with Tube Cleaner. Comes in bag of 10 and in sizes 7/16" (SC-TC-BN-7/16), 1/2" (SC-TC-BN-1/2), 9/16" (SC-TC-BN-9/16), 5/8"(SC-TC-BN-5/8), 11/16" (SC-TC-BN-11/16) and 3/4" (SC-TC-BN-3/4).
  • CoilJet Foaming Nozzle

    Creates a thick, rich lather to lift dirt and debris from coils. The CoilJet foaming nozzle is designed to add air to the spray of foaming coil cleaner, increasing foam levels and helping lift and remove dirt from HVAC and refrigeration coils.
    • Creates a thick, rich lather for better cleaning.
    • Best if use with SpeedyFoam coil cleaner.
    • Increases cleaning effectiveness by lifting out dirt embedded in coils.
  • SpeedyBright Biodegradable Descaler/Limescale Remover

    Safe and effective descaler and lime scale remover approved for potable water use Scientifically formulated to dissolve all types of limescale, rust and calcium carbonate deposits from water passages and heating elements. SpeedyBright improves operating efficiency in tankless water heaters, gas/electric water heaters and other water heating/heat exchange systems. Extend the usable life of cleaned equipment by quickly and safely removing energy robbing contaminants. Phosphoric acid based cleaner classified by UL to NFS/ANSI Standard 60.
    • Removes lime scale effectively
    • Approved for potable water use
    • Works great with BucketDescaler®
  • Tube Cleaner Grit Brush 7/16"-5/8" 6/Pack

    Brushes away dirt and debris fast Tube Cleaner Grit Brushes 7/16"-5/8" are durable, high-performance tube cleaning brushes and designed for cleaning light to medium debris from tubes. Comes in bag of 6 and available in sizes 7/16"-5/8"(SC-TC-BGB-75) 11/16"-3/4" I.D. (SC-TC-BGB-100) and 13/16"-1" I.D. (SC-TC-BGB-125).
  • CoilJet 45° Quick Disconnect Adapter

    For use with CoilJet® Coil Cleaner CoilJet 45° Quick Disconnect easily connects to CoilJet Coil Cleaning System from SpeedClean. High-performance adapter also comes available with 90° angle (CJ-QDN-90).
  • SpeedyFoam Condenser Coil Cleaner

    The smarter, safer & biodegradable alkaline foaming micro bubble coil cleaner SpeedyFoam is safe for coated and uncoated coils. It is an acid-free, alkaline, non-caustic, degreasing foaming formula. (Say that ten times fast, I dare you). It's safer for employees to use, more effective on grease and works great on all metals and has a clean, fresh scent. Plus it's 4x concentrated, so you get more bang for your buck. It's designed for use with CoilJet and Condenser Needle but can be used with pump sprayers too.
    • Foaming micro bubble coil cleaner, non-acid, non-fuming and water soluble
    • Removes grime, oil, grease and rust from condenser and evaporator coils, mechanical equipment and air filters.
    • Non caustic and safe for all metals, including aluminum
    • Safer for coated and uncoated coils
  • BucketDescaler® Replacement Outlet Hoses

    Replacement Outlet Hoses are specifically designed for use with BucketDescaler®. Extra hoses quickly connect to machine for an easier reach and a more efficient clean.