-
SpeedyBright® 5 Gallon Pail
Safe and effective descaler and lime scale remover approved for potable water use Scientifically formulated to dissolve all types of limescale, rust and calcium carbonate deposits from water passages and heating elements. SpeedyBright improves operating efficiency in tankless water heaters, gas/electric water heaters and other water heating/heat exchange systems. Extend the usable life of cleaned equipment by quickly and safely removing energy robbing contaminants. Phosphoric acid based cleaner classified by UL to NFS/ANSI Standard 60.- Removes lime scale effectively
- Approved for potable water use
- Works great with BucketDescaler®
-
CoilShot Coil Cleaner Tablets
Replaces bulky heavy liquid coil cleaner. The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.- Each tablet is equal to approximately 1/2 gallon of coil cleaner.
- Eliminates the need for bulky liquid coil cleaners.
- Safe for all coils
- Plant friendly, non acidic and non caustic
-
CoilShot® 3ft. Coil Cleaning Wand
Optional wand for CoilShot® increases cleaning performance. 3 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don't have to remove the top fan and housing.- Lets you clean from behind the coil, opposite the flow of air.
- High grade aluminum.
- Available APRIL 2016.
-
Mini-Split Cassette Bib® Kit
The newest in the line of innovative ductless cleaning solutions. Cleaning ductless ceiling cassettes is a daunting task, but we’ve just made it a whole lot easier. Using pressurized water and coil cleaner is the key to a good coil cleaning. Our ductless cassette bib kit installs in seconds and quickly creates a safe funnel where all your water and cleaner are safely deposited into a bucket. Super easy to use and really effective.- Quick to set up and easy to move from job-to-job.
- Reusable
- Includes 10' drain line.
- Keeps walls and floors safe from water and overspray.
-
CoilJet® CJ-200E HVAC Coil Cleaner System
More Pressure. More Power. More Clean Coils in Less Time. Meet the CoilJet-200E, the newest family member in the CoilJet line of portable coil cleaners. It's designed for when you need that little bit more oomph to your coil cleaning. CoilJet CJ-200E is equipped with everything you need to get your coil cleaning job done faster. Packed with features like the options of tanked water, or continuous water supply, 110V power integrated chemical tank and up to 220 PSI, this portable and powerful coil cleaning equipment can clean thicker, dirtier coils like never before! -
CoilShot® Condenser Cleaner Tool
Get the job done in one shot! The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.- Quickly and easily clean single-pass condenser coils in minutes.
- Replaces bulky liquid coil cleaners with small tablets.
- Plant friendly and grease-fighting formulas available.
- Saves on the hassle and waste of liquid coil cleaner.
- 1-2 tablets per job are all you need.
-
Tube Cleaner Shaft For Tube I.D. 7/16" - 1/2"
High performance, incredible durability. High-performance nylon coated shaft for tube I.D. 7/16" - 1/2". Designed for use on SpeedClean chiller tube cleaners but also fit major competitive brand products. Shaft comes in three length sizes, of 15' (SC-TC-S02-15), 25' (SC-TC-S02-25) and 35' (SC-TC-S02-35). FOR USE WITH SC-TC-50 MODEL ONLY- High-performance nylon coating.
- Industrial quality internal parts.
- Standard threaded machine and brush couplings.
-
Tube Cleaner Shaft For Tube I.D. 9/16" - 1"
High performance, incredible durability. High-performance nylon coated shaft for tube I.D. 9/16" - 1". Designed for use on SpeedClean chiller tube cleaners but also fit major competitive brand products. Shaft comes in three length sizes, of 15' (SC-TC-S03-15), 25' (SC-TC-S03-25) and 35' (SC-TC-S03-35). FOR USE WITH SC-TC-50 MODEL ONLY- High-performance nylon coating.
- Industrial quality internal parts.
- Standard threaded machine and brush couplings.