CoilShot® Condenser Coil Cleaning Tool

CoilShot® Condenser Cleaner Tool

Get the job done in one shot! The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.

Quickly and easily clean single-pass condenser coils in minutes.
Replaces bulky liquid coil cleaners with small tablets.
Plant friendly and grease-fighting formulas available.
Saves on the hassle and waste of liquid coil cleaner.
1-2 tablets per job are all you need.

* When used with CoilShot-HD tablets.

Details

CoilShot®-HD Coil Cleaner Tablets

CoilShot®-HD Heavy-Duty Coil Cleaner

WHERE TO BUY

WATCH VIDEO

Kick your condenser cleaning into high gear with CoilShot. The new CoilShot-HD tablet formula is designed for use with the CoilShot system and offers heavy-duty cleaning, degreasing and brightening of commercial single-pass HVAC coils.

Eliminates the need for bulky liquid coil cleaners.
Degreases and brightens coils
For heavy-duty applications

Details

Condensate Drain Tool

Condensate Drain Line Tool for Wet/Dry Vacuums

Clear drain pans floods fast. More power. Less Mess. Attaches to virtually any wet/dry vacuum hose. Designed to clear backed up and clogged condensate drain lines, pans and more fast, the CLT-1 condensate line drain tool from SpeedClean is specifically designed to work with virtually any wet/dry vacuum. It clears drains quickly of water, dirt and other standing debris. It simply inserts into the end of the vacuum hose and goes into – or over – 3/4" and 1" drain lines and hoses for condensate lines, pumps and more. Its flexible design means it can be used in tight spots too. Plus it’s safer - and cheaper - than compressed air or CO2 and uses your regular wet/dry vacuum. And when the job's done, it's small enough to fit in most tool boxes or anywhere you keep your tools.

Fits most wet/dry vacuums with hoses up to 2 1/4" diameter
For condensate lines, drains, pans and more
Tapered end fits inside standard 3/4" and 1" lines
Ridges for maximum flexibility
Stepped to fit almost any wet/dry vacuum
Reversible end piece for fitting over 3/4" and 1" lines

Details

Condenser Needle®

Condenser Needle® Condenser Coil Cleaner

Precision Coil Cleaning Blast dirt and debris from condenser coils without damaging delicate fins with Condenser Needle. This product is designed to attach to a water hose and clean the backside of the condenser. It reaches inside most units without having to remove the fan blades and quickly cleans the entire coil bed.

Clean HVAC Condenser Coils in Minutes
Attaches to a standard water hose
36″ wand easily handles most units
Exclusive spray tip delivers 90° spray pattern up to 3+ gallons per minute
Adjustable chemical injection hose

Details

Dry Steam Coil & Surface Cleaner

Harness the power of steam! Steam is an incredible, natural cleaning and sanitizing agent. It removes grease, oils, dirt and bacteria, all without one drop of a chemical. Dry steam takes it one step further. It’s superheated water vapor that contains only 10% moisture or less at 235-degree temperature. This means that surfaces are cleaned, and sanitized with very little water residue remaining.

Quickly clean and sanitize surfaces
Removes oils, grease, and dirt
Use on coils and other areas
Uses no chemicals
Includes complete accessory kit

Details

FlowJet 12′ Extension Hose

FlowJet™ 12' Extension Hose

Extend the cleaning reach of your FlowJet FlowJet 12' extension hose CJ-HF-EXTHOS offers extra reach for a superior coil cleaning experience with FlowJet. Extension hose helps add extra cleaning length.

WHERE TO BUY

Details

FlowJet Low Pressure Soaping Nozzle

Low pressure for safer coil cleaning FlowJet Low Pressure Soaping Nozzle is a high-quality replacement nozzle that provides just enough pressure to safely clean coils. Specially designed for use with FlowJet systems. Nozzle also comes available with 15° angle (CJ-QDN-1512Y).

Quickly attaches to FlowJet Coil Cleaner System
Provides low pressure that wont damage coils
Made from high grade brass material

WHERE TO BUY

Details

FlowJet Spray Gun

Easily attaches to FlowJet FlowJet Spray Gun by SpeedClean is specifically for use with FlowJet Coil Cleaner systems. This high-quality spare tool attaches to equipment quickly and easily.

WHERE TO BUY

Details

FlowJet Spray Wand

Reach spots that seem impossible. This high quality wand quickly attaches to the FlowJet and allows you to clean coils deep into the condenser or evaporator. Now reaching thick dirty coils in tight spots is easier than ever before. To extend the wand further, use with our extension lance, available in 16" (CJ-WWSS-EXT).

Attaches quickly to FlowJet spray gun.
Adds cleaning length to make jobs easier.
Made from high grade stainless steel.

WHERE TO BUY

Details

Kit Mini-Split Bib®

El Kit Mini-Split Bib es la forma más rápida de limpiar serpentines mini-split sin ductos y más. Si usted es un contratista, simplemente tiene que tener uno o dos en su camión. Este kit le permite limpiar de manera segura y rápida prácticamente cualquier sistema mini-split de la manera correcta utilizando agua a presión en las serpentines, sin causar ni el más mínimo derrame. La tecnología patentada mantiene el agua alejada de las paredes y otros alrededores y la dirige al cubo de 5 galones para su eliminación, por lo que es limpio y seguro por todos lados.

Rápido de configurar y fácil de pasar de un trabajo a otro.
Incluye una línea de drenaje de 8' para montajes altos.
Mantiene las paredes y pisos a salvo del agua y del rocío.

Details

Mini-Split Bib Accessory Kit

Mini-Split Bib® Accessory Kit

Complete with everything you need to effectively clean mini-splits Mini-Split Bib Accessory Kit completely covers every aspect of the mini-split cleaning experience. Kit includes a 24" wand with 90 degree spray head, a 12" flexible wand with 0 degree spray and a 25 degree fan-spray nozzle all designed for easier access and cleaning of the blower wheel and hard-to-reach dirt and debris.

WHERE TO BUY

Details

Mini-Split Bib Kit Replacement Bib

High-quality replacement bib. The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.

For use with Mini-Split Bib Kit.
Made from high grade 4 mil plastic.
Long life usage.

WHERE TO BUY

Details